Overview

Small parts contained in your Proto M and its accessories may present a choking hazard to small children. Keep away from children.

The Proto M is intended for indoor use only. It is not intended to be used near water or in direct sunlight.

The Proto M shall be used with the following software, original accessories, and components only:

• Proto Studio Kit

• Proto Live Beam Kit

• Proto Beam App

• Proto Cloud

• Travel Case

The Proto M may only be used in accordance with the instructions described in this guide. Any use other than those described in this guide is considered a non-intended use and will invalidate the warranty.

Technical Life Span

The technical lifespan of the Proto M is five years of use. Dispose of the product when the Proto M is expired.

Intended Use Safety Information

• Avoid prolonged listening at high volume. Prolonged listening of the device at high volume can damage the ear of the user. To prevent possible hearing damage, users should not listen at high volume levels for long periods.

• Do not expose the Proto M to temperatures above 90°F / 32°C or below 50°F / 10°C.

Installation Safety Information

• Check the Proto M for damage after unpacking. If there is any visible damage, contact Proto.

• Install the Proto M in a well-ventilated indoor space.

• Do not expose the Proto M to steam or install it near heat sources such as radiators, heat registers, stoves, or other devices that produce heat.

• Do not install the Proto M near water or in direct sunlight.

• Install theProto M on a clean, flat, stable, and hard surface that is clear of other objects.

• Use two hands when moving, lifting, or rotating the Proto M.

• To prevent pinching, keep fingers away from the area where the display connects to the base.

• Only handle the Proto M with clean, dry hands.

Electrical Safety Information

• Check the electrical cable for damage before electrical installation.

• Only connect the Proto M to an easily accessible and grounded outlet with earth leakage protection using the provided cable. Do not force the power adapter into an outlet or plug multiple electric devices into the same power outlet. Overloading an outlet can cause it to overheat and may result in a fire.

• Only use the included power supply for the device. Do not use a 3^rd-party power supply.

• Only use an extension cord or adapter rated for a minimum of 4 amps (4A).

• If you wish to stop power from flowing into your Proto M, unplug it from the outlet.

• Immediately unplug the Proto M from the outlet:

  • if it has been damaged

  • if water or another substance enters the Proto M

  • if you smell smoke or other odors coming from the Proto M

  • during lightning storms

  • when unused for long periods of time

Service and Repair Safety Information

The Proto M contains no user serviceable parts. Contact Proto for service or repair.

SYMBOL	MEANING
	The CE mark on the product is the manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety, and environmental protection legislation.
	The FCC mark on the product is the manufacturer’s declaration that the product's electromagnetic radiation is below the limits specified by the Federal Communication Commission (FCC).
	The TELEC mark on the product is the manufacturer's declaration that the product conforms to the technical standards, regulations, and requirements imposed under Japanese Radio Law.
	The UKCA mark on the product is the manufacturer's declaration that the product conforms to the regulations and requirements of GB legislation.
	This symbol on the product, the accessories, or packaging indicates that this device shall not be treated as unsorted municipal waste but shall be collected separately.